The yacht pool air insufflation system does not turn off
This guide explores the most common reasons why a yacht pool air insufflation system might not turn off properly. The air insufflation system creates turbulence, but if it remains active, the issue might be related to the control button or the system's electronics. Below, you will find a series of common checks and interventions to identify and resolve the problem for systems with either a piezoelectric or pneumatic button.
The air insufflation system with touch button does not turn off
For systems equipped with a piezoelectric button, several issues can cause the system to fail to turn off. The main causes are detailed below.
The timer is still active
If the system is equipped with a timer for automatic shutoff, this device is located inside the electrical panel. The timer operates the hydromassage system for the programmed time and turns it off automatically. Occasionally, the timer may malfunction and remain active (engaged), requiring replacement.
The touch button is stuck on ON
The touch button might be defective or burned out, remaining in the ON position. In this case, replacing the button is necessary.
The circuit breaker is stuck
The magnetic thermal relay in the electrical panel may become "stuck" in the ON position. If this happens, the relay must be replaced.
The air insufflation system with pneumatic button does not turn off
For systems with a pneumatic button, here are the potential reasons why the air insufflation system may fail to turn off.
The timer is faulty
The timer, located in the electrical panel, automatically shuts off the system after the programmed time. If the timer malfunctions and remains active, it must be replaced.
The circuit breaker does not reset
The magnetic thermal relay in the electrical panel may be "stuck" and must be replaced.
The microswitch remains active
The microswitch that regulates the transition between air and the electrical cable might be defective and remain in the ON position. Located in the electrical panel, the microswitch should be replaced.
If the issue persists, it is recommended to seek assistance from qualified professionals to prevent further damage to the system. You can contact our support center for any needs via the dedicated page.
Using our remote monitoring systems, we can detect anomalies and solve many issues remotely, reducing downtime and ensuring fast and targeted assistance without requiring immediate on-site intervention.
